Onboard Video
Memory Size
●
32 MB
●
64 MB
●
128 MB
SATA Controller Allows you to disable/enable the SATA Controller.
USB Ports Allows you to disable/enable the USB ports.
Onboard LAN Allows you to disable/enable onboard LAN controller.
Onboard LAN Boot
ROM
Allows you to disable/enable the boot ROM of the onboard LAN chip.
Supervisor Password Shows whether the supervisor password is enabled or disabled (view only).
User Password Shows whether the user password is enabled or disabled (view only).
Change Supervisor
Password
Allows you to change the supervisor password.
Onboard Audio Allows you to set the onboard audio to:
●
Auto
●
Disabled
●
Enabled
Microphone Input Allows you to set disable/enable microphone input.
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table A-3 Computer Setup—Power
Option Description
After AC Power Failure Allows you to select system restart behavior after power loss:
●
Stay Off
●
Power On
●
Auto
XD Disables/enables XD (eXecute Disable) bit.
NOTE: The XD bit is a technology used in to separate areas of memory for use by either storage
of processor instructions or code or for storage of data. Memory designated with the NX attribute
may only be used for storing data. Processor instructions should not reside and cannot be executed
there. This technology is used to prevent buffer overflow attacks – malicious software that takes over
computers by inserting code into another program's data storage area and running that code.
S5 Maximum Power
Savings
Disables/enables the S5 power setting. Enabling this setting enables the EuP Lot6 power
specification of 1 Watt in S5 mode. This setting disable various system board components to reduce
power consumption.
Table A-2 Computer Setup—Advanced (continued)
Model 500B — Computer Setup (F10) Utilities 53
To Next Page
Loading...
Need help?
General