HP 5120 EI Switch Series User Manual

221
1. Configure the SSH client
# Generate the RSA key pairs.
Run PuTTYGen.exe, select SSH-2 RSA and click Generate.
Figure 61 Generate a key pair on the client 1)
While the key pair is being generated, you must move the mouse continuously and keep the mouse off
the green progress bar shown in Figure 62. Otherwise, the progress bar stops moving and the key pair
generating process will be stopped.

HP 5120 EI Switch Series Specifications

General

Brand	HP
Model	5120 EI Switch Series
Category	Switch
Language	English