HP 5120 EI Switch Series User Manual

230
# Set the user command privilege level to 3.
[SwitchB-ui-vty0-4] user privilege level 3
[SwitchB-ui-vty0-4] quit
# Import the peer public key from the file key.pub.
[SwitchB] public-key peer Switch001 import sshkey key.pub
# Specify the authentication method for user client002 as publickey, and assign the public key Switch001
to the user.
[SwitchB] ssh user client002 service-type stelnet authentication-type publickey assign
publickey Switch001
3. Establish a connection between the SSH client and the SSH server
# Establish an SSH connection to the server—10.165.87.136.
<SwitchA> ssh2 10.165.87.136
Username: client002
Trying 10.165.87.136 ...
Press CTRL+K to abort
Connected to 10.165.87.136 ...
The Server is not authenticated. Continue? [Y/N]:y
Do you want to save the server public key? [Y/N]:n
Later, you will find that you have logged in to Switch B successfully.

HP 5120 EI Switch Series Specifications

General

Brand	HP
Model	5120 EI Switch Series
Category	Switch
Language	English