HP 5120 EI Switch Series

21
Task
Remarks
Configuring RADIUS accounting-on
Optional
Specifying a security policy server
Optional
Configuring interpretation of RADIUS class attribute as CAR
parameters
Optional
Enabling the RADIUS trap function
Optional
Enabling the listening port of the RADIUS client
Optional
Displaying and maintaining RADIUS
Optional
Creating a RADIUS scheme
Before performing other RADIUS configurations, follow these steps to create a RADIUS scheme and enter
RADIUS scheme view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a RADIUS scheme and
enter RADIUS scheme view
radius scheme radius-scheme-
name
Required
No RADIUS scheme by default
NOTE:
A RADIUS scheme can be referenced by multiple ISP domains at the same time.
Specifying the RADIUS authentication/authorization servers
Follow these steps to specify the RADIUS authentication/authorization servers:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter RADIUS scheme view
radius scheme radius-scheme-name
—
Specify the primary RADIUS
authentication/authorization
server
primary authentication { ip-address [ port-
number | key string] * | ipv6 ipv6-address [
port-number | key string ] * }
Required
Configure at least one
command.
No
authentication/authorizat
ion server is specified by
default.
Specify the secondary
RADIUS
authentication/authorization
server
secondary authentication { ip-address [ port-
number | key string] * | ipv6 ipv6-address [
port-number | key string ] * }