To Next Page

To Previous Page

Figure 19 Add an access user account

2. Configure the switch

 Configure a RADIUS scheme

# Create a RADIUS scheme named rad and enter its view.

<Switch> system-view

[Switch] radius scheme rad

# Set the server type for the RADIUS scheme. When using the iMC server, set the server type to

extended.

[Switch-radius-rad] server-type extended

# Specify the primary authentication server and primary accounting server, and configure the keys for

communication with the servers.

[Switch-radius-rad] primary authentication 10.1.1.1

[Switch-radius-rad] primary accounting 10.1.1.1

[Switch-radius-rad] key authentication expert

[Switch-radius-rad] key accounting expert

# Configure the scheme to include the domain names in usernames to be sent to the RADIUS server.

[Switch-radius-rad] user-name-format with-domain

[Switch-radius-rad] quit

 Configure an authentication domain

# Create an ISP domain named bbb and enter its view.

[Switch] domain bbb

# Configure the ISP domain to use RADIUS scheme rad.

[Switch-isp-bbb] authentication lan-access radius-scheme rad

[Switch-isp-bbb] authorization lan-access radius-scheme rad

[Switch-isp-bbb] accounting lan-access radius-scheme rad

[Switch-isp-bbb] quit

HP 5120 EI Switch Series User Manual

Questions and Answers: