HP 525

12
When the AP operates as a fit AP, all of its settings are configured on the AC. You can use the display
wlan ap all command to examine the AP status on the AC. When the AP status is R/M, the AP has been
successfully connected to the AC.
<AC>display wlan ap all
Total Number of APs configured : 1
Total Number of configured APs connected : 1
Total Number of auto APs connected : 0
AP Profiles
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, R = Run, KU = KeyUpdate, KC = KeyCfm
--------------------------------------------------------------------------------
AP Name State Model Serial-ID
--------------------------------------------------------------------------------
ap1 R/M 525-WW CN12GTH123
--------------------------------------------------------------------------------
<AC>