HP 525

19
Appendix B LEDs
Table 3 LED description
Mar
k
Status Descri
p
tion
Flashing green at 1 Hz
The AP is booting.
NOTE:
When the AP operates as a fit AP, it is always in this state
before it is registered to an AC.
Slowly pulsing green Connections are present on the 2.4 GHz radios.
Flashing blue at 0.25
Hz
The AP has been booted and has registered to the AC. It is
in standby state (no client is associated to the AP).
Flashing blue at 4 Hz The AP is upgrading its system software image.
Slowly pulsing blue Connections are present on the 5 GHz radios.
Steady orange An initialization exception has occurred to the AP.
Flashing orange at 1 Hz
The AP cannot detect any radio interface.
Flashing orange at 8 Hz
An Ethernet port or radio interface is operating incorrectly.
Cycle through two
green pulses then two
blue pulses
Connections are present on both the 2.4 GHz and 5 GHz
radios.