Chapter 2 Operating Your Universal Counter
Using the Print Menu
2-56 Operating Guide
2
Using the Print Menu
Overview of the Print Menu
The Print menu allows you to:
• enable or disable printing (PRINT: OFF or ON).
• get help on how to print (PRINT HELP ?).
To Use the Print Menu
1 Press Save & Print key until
PRINT:
is displayed.
2 If
PRINT: OFF
is displayed, press any one of the arrow keys to toggle the
next state.
PRINT: ON
is displayed.
When PRINT is enabled, the Counter displays and prints the results for
each measurement. In addition, if STATS: ON, all statistics (that is,
standard deviation, mean, maximum, and minimum) will be printed.
NOTE
Printing may slow the update rate of the Counter because the Counter
may have to wait for the printer.
3 Press Save & Print key.
PRINT HELP ?
is displayed.
4 Press Enter key.
The instruction “
CONFIGURE PORT ON UTILITY MENU; REMEMBER TO
SAVE SETUP FIRST
” is displayed.
5 Save your current setup as shown in the section titled “To Use the Save
Function.”
6 Refer to the section in this chapter titled “To Configure the RS-232 Serial
Port for Printing” for information on how to configure and connect the
Counter to a printer.
To Next Page
Loading...
