HP 53132A - Where to Find some Key Working Examples

Chapter 2 Operating Your Universal Counter
Introduction
Operating Guide 2-3
2
Where to Find Some Key Working Examples
• Example Procedure for Gate and External Arm page 2-24
• Example Procedure for Changing the Number of
Digits of Resolution Displayed for More
Precise Measurements
page 2-25
• Example Procedure for Scale Function page 2-28
• Example Procedure for Offset Function page 2-29
• Example Procedure for Turning Off Math Mode page 2-30
• Example Procedure for Setting the Offset From
the Last Measurement Value
page 2-31
• Example Procedure for Computing Stats page 2-33
• Example Procedure for Easy Viewing of Stats page 2-34
• Limits Testing Example 1—Flag and Stop Measuring
On Limits
page 2-38
• Limits Testing Example 2—Flag On Limits but
Continue Measuring
page 2-40
• Limits Testing Example 3—Use Analog Graph
Display While Adjusting Input Signal
page 2-40
• Limits Testing Example 4—Selecting Filtering
Conditions of Stats Computation
page 2-42
• Limits Testing Example 5—Sending the Limit-Detect
Output to the RS-232 Serial Port
page 2-43