Mode
l 5315A/ B
Safety Considerations
WARNING
IF
THIS INSTRUMENT
IS
TO
BE
ENERGIZED VIA AN AUTOTRANSFORMER
(FOR
VOLTAGE REDUCTION)
MAkE
SURE
THE
COMMON
TERMINAL
IS
CONNEC-
TED
TO
THE EARTHED POLE
OF
THE
POWER SOURCE.
WARNING
BEFORE SWITCHING
ON
THE INSTRUMENT, THE PROTECTIVE EARTH TERMI-
NALS
OF
THE INSTRUMENT
MUST
BE
CONNECTED
TO
THE PROTECTIVE
CON·
DUCTOR
OF
THE
(MAINS) POWER
CORD.
THE MAINS PLUG SHALL ONLY
BE
INSERTED IN A
SOCkET
OUTLET PROVIDED WITH A PROTECTIVE EARTH
CONTACT.
THE
PROTECTIVE
ACTION
MUST
NOT
BE
NEGATED BYTHE
USE
OF
AN EXTENSION
CORD
(POWER
CABLE
)
WITHOUT
A PROTECTIVE
CONDUC-
TOR
(GROUNDING)
.
WARNING
THE
SERVICE
INFORMATION
FOUND
IN THIS MANUAL
IS
OFTEN USED WITH
POWER
SUPPLIED
AND
PROTECTIVE COVERS REMOVED
FROM
THE INSTRU-
MENT. ENERGY
AVAILABLE
AT MANY POINTS MAY,
IF
CONTACTED, RESULT
IN PERSONAL INJURY.
I
CAUTION
Before switching
on
this instrument:
1.
M~ke
sure
the
instrument
is
set
to
the
vollilge of
the
power
source
.
2.
Ensure
th~t
all devices
connected
to
this instrument are
connected
to
the
protective (earth) ground.
3.
Ensure
th~t
the
line power (Mains) plug
is
connected
to
a
three-conductor
line power outlet
that
has
~
protective (earth)
ground.
(Grounding
one
conductor
of a two-conductor
outlet
is
not
sufficient.)
4.
M~ke
sure
that
only fuses with
the
required rated
current
and
of
the
speci-
fied type (normal blow, time delay, etc.) are used for replacement. The use
of repaired fuses
and
the
short-circuiting of fuse holders must
be
avoided.
vi
i
To Next Page
Loading...
Need help?
General
