HP 730 - Macintosh

Your Windows CD may also include bonus software from other
manufacturers. To install any Bonus software:
Click S_ar_,click Run, and in the Own box, type
X:\Bonus\se_up.exe (where X is the letter of your CD drive).
2 Click OK, and then follow the on-screen instructions to
install the bonus software.
M_cln_osh
] Close all programs and temporarily disable any virus
protection software running on your computer.
2 Insert the HP Photo & Imaging software CD into the CD
drive of your computer.
3 Double-dick the CD icon on the computer desktop.
4 Double-click the installer icon, and then follow the on-screen
instructions to install the software.
NOTE Before you can unload images from the camera to a
Macintosh computer, you must first change the USB
Configuration setting to Disk Drive in the Setup menu on
the camera. See Chapter 6: Using _hesetup menu on
page 67, and then see USB cor_figura_ion on page 69.
Your Macintosh CD may also include bonus software from
other manufacturers. To install any Bonus software:
Double-click the Bor_usfolder icon.
2 Double-click the installer icon for the bonus software.
3 Follow the on-screen instructions to install the software.
Chapter 1: Getting started 21