Using the flash
NOTE The flash does not work while recording video clips.
To change the flash setting, press the Flash _. button on the top
of the camera until the desired setting appears on the Status
LCD. tf LiveView is on, the icon also appears in the Image
Display.
iThe camera measuresthe available light
and fires theflash if necessary.This is the
_idefault setting.
FIGshOn i_tcamera always fires the flash. If the
is behind your subject, usethis setting
ito increase the light on the front of your
subject. This iscalled "fill-flash".
.............._ _mer_;wiiii_o_fi_hefic;s sei_i_.............
ii isetting when you do not want a flash (such
iI as with distant objects).This may resultin
long exposuresthat will require using a
iThe camera fires the flash to illuminate
m _ iobjects in theforeground. Itthen continuesto
iexposeas if theflash had not fired to gather
ithe background. This setting only works
iwhen taking picturesof still objects.Hold the
icamera steady to preventblurry images. For
NOTE Thecamera remains in the current flash setting until you
change it or turn off the camera.
30 hp photosmart 730 series user's manual
To Next Page
Loading...
