HP 730 - Using Burst Mode; Using M Acro M Ode

Using burst od÷
Burst is used to take multiple pictures in a row as quickly as the
camera can.
] Pressthe Mode button until the Burst _ icon appears on
the Status LCD. If LiveView is on, the icon also appears in
the Image Display.
2 Frame the subject and press the Shut_r Button all the way
down and hold it.
3 Flash is disabled and the camera takes pictures as quickly
as possible until the memory isfull or the ShuHer button is
released.
Using acro od÷
You can usethe Macro focus setting for taking close-up pictures
(from 0.1 m (4 inches) to 0.5 m (19.7 inches).
Pressthe Mode button until the Macro _ icon appears on
the Status LCD. If LiveView is on, the icon also appears in
the Image Display.
2 Use the Image Display to frame the subject of the picture
(the optical viewfinder will not give you an accurate
representation of a picture taken in macro mode).
3 Pressthe Sh_br button all the way down to take the picture.
36 hp photosmart 730 series user's manual