The following table helps explain the settings in more detail.
Icon Setting Description
Average Camera usesthe entire sceneregion to
measure and calculate exposure.Usethis
setting when you want everything in the
picture to be used equally when calculating
exposure.
None Center- Camera usesthe centerof the sceneregion to
W÷ight_J measure and calculate exposure.Thissetting is
good to usewhen thesubject isin the centerof
the frame. Exposurewill be basedmore on the
subject than on its surroundings. This isthe
default setting.
Spot Camera usesa small area in the center of the
scene region to measureand calculate
exposure. Thiscan be useful in backlit scenes
or when the subject isvery dark or light
compared to the restof the scene.When using
this setting, pressthe ShuHerbutton halfway
down to lock the exposureon the spot in the
center, then recomposethe sceneas desired.
If the new setting is anything other than the default setting of
Center-Weighted, the icon for the setting (in the table above)
will appear at the top of the LiveVi_ screen.
The new setting remains in effect until it is changed again or
until the camera is turned off.
42 hp photosmart 730 series user's manual
To Next Page
Loading...
