HP 8153A - Page 120

HEWLETT-PACKARD:
8153A:
0 :
1 . 0 :
manufacturer
instrument model number
means that serial numbers,
are not provided,
firmware revision level
Definition The *IDN? query gets the instrument identification over
the interface.
Related Commands *0PT?.
Example DIM A$ [30]
OUTPUT
ENTER 722; A$
*OPC
operation Complete command.
Syntax =t=0PC
Definition The ♦ OPC command parses all program message units in
the input queue and sets the operation complete bit in the
Standard Event Status register, when the contents of the
input queue have been processed.
The following actions cancel the *0PC command (and put
the instrument into Operation Complete, Command Idle
State):
■ Power-on
■ the Device Clear Active State is asserted on the
interface.
H *CLS
■ *RST
Related Commands *0PC?, ♦ WAI
Example OUTPUT 722; " *CLS; *ESE 1; *SRE 32 "
OUTPUT 722; "^OPC"
6-8 Remote Operation • Common Commands