HP 8153A - Running the Logging Application; The Manual Logging Application; Running the Manual Logging Application

Running the Logging Application
To run the application, press fExec) . You cannot run the application if
you are editing parameters. While the application is running, the RUN
operation-indicator lights.
Whiie the application is running, the result field shows the sample, and the
character field shows the number of samples that have been taken. After all the
samples have been taken, the RUN operation- indicator switches off.
(Pause) suspends the running of the application. You can restart it by pressing
(^uiel a second time. When you have pressed pause, you can look at the
parameters set for the application in the Measure mode. You select parameters
with (Next) and (Prev) .
(Exec) stops the application running.
The Manual Logging Application
In the Manual Logging application the instrument takes a sample every time the
user presses (Exec) .
When you select the Logging application the character field shows MAN LOGO.
Press (Edit) to look at the existing samples, or to take a sample again. After
pressing (Edit) you can select a sample using the Modify keys. While you are
editing samples, the EDIT operation- indicator lights. To take a sample again,
press (Exec ) ' the input power-level replaces the power-level logged for the
chosen sample.
Press (Edit) if you have finished editing.
Running the Manual Logging Application
While the application is running, the resuit field shows the input power-level,
and the character field shows the number of samples taken.
Ib take a sample, press (Exec) . When you press (e^cI the result is stored as the
next sampie.
Example The user is not currently editing samples. The character field
shows #61, that is, 61 samples have been taken. On pressing
(Exec ) . the input power-level is read and stored as sample
number 62. #62 is shown in the character field.
While a sample is being taken, the RUN operation-indicator lights.
3-12 Local Control - Menu Mode