HP 8153A - Page 126

*TRG
TRiGger command.
Syntax
Definition
Related Commands
Example
*TST?
seif-TeST query.
Syntax
Response
5 Definition
Example
*WAI
WAIt command.
Syntax
Definition
*TRG
The *TRG command hos the same effect as the interface
command “Group Execute Trigger” (GET). The command
triggers any event that was suspended waiting for a
trigger.
Interface Command GET, INIT, IHIT:COfJT, IMIT:C0WT?
OUTPUT 722C'*TRG''
*TST?
<value>
value == Ojl
A value of zero means no errors.
The *TST? query makes the instrument perform a self-test
and place the results of the test in the output queue.
No further commands are allowed while the test is
running. After the self-test the instrument is returned to
the setting that was active at the time the self-test query
was processed.
OUTPUT 722;"*TST?''
ENTER 722; A$
*WAI
The *WAI command prevents the instrument from
executing any further commands until the current
command has finished executing. All pending operations
are completed during the wait period.
S-14 Remote Operation ■ Common Commands