HP 8153A - Page 233

Cleaning Procedures
In general, wherm)er possible use physically contacting dry connectors. Fiber
connectors may be used dry or wet. Dry means without index matching
compound. If there is a need to use an index matching compound, use only HP
index matching oil (part number 8500-4922). Clean the connectors, interfaces
and bushings carefully each time after use.
Cleaning Materials
Lens Cleaning Paper
Special Cleaning Tips
Blow Brush
Adhesive Cleaning tape
Isopropyl Alcohol
Pipe Cleaner
HP p/N
9300-0761
9300-1351
9300-1131
15475-68701
Not available from HP. This should be available from
any local pharmaceutical supplier.
Cleaning Procedures E-1