HP 8153A - Page 272

Instruments with Serial Numbers 2946G00225 and
Earlier
The Print Application
In the Print application the instrument takes the samples from a Stability or
Logging application and generates a printout of the samples. You can only
printout the samples from the most recent Stability or Logging or Manual
Logging application.
When you select the Print application the character field shows PRINT. This
application has two parameters. SAMPLE sets the number of samples printed out.
COMMENT is an eight character message printed on the printout for identification.
Press [Edit] to look at, or edit the parameter. While you are editing a parameter,
the EDIT operation-indicator lights.
SAMPLES
When you select this parameter, the left side character field shows the message
SAMPLES. The right side character field shows the number of samples that will
be printed.
■ You edit the number of samples to be printed. The lower limit is 0. The
higher limit is 500. The displayed value is always the setting for the samples.
■ Press (Edit] when you have finished editing.
COMMENT
When you select this parameter the left side character field shows the message
COMMENT. The right side character field shows the comment string. The comment
string is included so that you can identify the printout.
Note Other applications in the same channel share the COMMENT
parameter. Changing this parameter in the Print application
affects the Plot application.
■ You edit the comment using the Modify keys. There are eight characters in
the comment and each of these can be a number (0 to 9), a math symbol (-,
+), a space, a letter (A to Z), or punctuation symbols (!, ?, ., ,, :, ;, I, Q,
K-2 Backdating