HP 8153A - Page 39

1
■ The Show application lets you look at the sample values from the
most recent Stability, Logging, or Manual Logging application.
Some simple statistics for the results are also given.
■ The Alignment application gives you visual, and audible
feedback of the input power, to help you align two components
for the maximum transfer of optical power.
The parameters for this application are
TYPE Which sets whether the maximum transferred
power is determined automatically by the
instrument, or set manually by the user.
DELTA Which sets the size of the change in transferred
power indicated on the display, or by the tone.
MAXPOWER Which sets expected, or required, maximum
transferred power.
The (Pause] key switches on and off the tone.
Getting Started 1-B