HP 8153A - Page 80

M
0153A
STABILITY
T «V3 . 1.00 8
Cal Factor. 0.000 dB
T total . 93,00 h
Max . -0,0001 dfl
23 0£6.
Kavelength . 1300.3 nn
Reference . 0.700 dBn
05-OCr-90 06; 39: A2
Olff . 0.0163 (38
Avg . -0,0132 08
■ The third column of data contaiOvS statistics based on the samples taken.
These are Max, the maximum power-level sampled, Min the minimum
power-level sampled, Diff, the difference between the minimum and
maximum power-levels sampled, and Avg, the mean average of the samples.
Note If the samples are taken in dB or dBm, Avg is the mean average
of these logarithmic values. If the samples are taken in Watts,
Avg is the mean average of the linear values.
■ The quantity on the y-axis of the plot is always power. The units can be dBm,
dB, or Watts.
3-16 Local Control • Menu Mode