HP 8508A - Page 50

Operation
Reflection measurements in 50 ohms - Direct inputs, reflection bridge
HP8S08A
Reflected
Incident
Transmission/Reflection Test Set
Figure 3-21. Reflection Measurements Setup
Equipment:
HP 8656B Synthesized Signal Generator
HP 8508A opt 050 Vector Voltmeter with 50 ohm Input Module
HP 85044A Transmission / Reflection Test Set
HP 11851B Cable Kit (3 cables required in this setup)
Adapters from type-N to DUT if required
Calibration Standard (Same as DUT connector)
3-26
E1089