HP 8719ET - Page 188

5-61
Hardkey/Softkey Reference
Analyzer Functions
outputs a title string to any device with an HP-IB address
that matches the address set with the analyzer
commands.
This softkey is generally used for two purposes:
• Sending a title to a printer when a CR-LF is not
desired.
• Sending commands to an HP-IB device.
outputs a title string to any device with an HP-IB address
that matches the address set with the analyzer
commands. This softkey is generally used for two
purposes:
• Sending a title to a printer when a CR-LF is not
desired.
• Sending commands to an HP-IB device.
outputs a title string to any device with an HP-IB address
that matches the address set with the analyzer
commands.
This softkey is generally used for two purposes:
• Sending a title to a printer for data logging or
documentation purposes.
• Sending commands to a printer or other HP-IB device.
is used in conjunction with other search features to track
the search with each new sweep. Turning tracking on
makes the analyzer search every new trace for the
specified target value and put the active marker on that
point. If bandwidth search is on, tracking searches every
new trace for the specified bandwidth, and repositions the
dedicated bandwidth markers.
When tracking is off, the target is found on the current
sweep and remains at the same stimulus value regardless
of changes in trace response value with subsequent
sweeps.
A maximum and a minimum point can be tracked
simultaneously using two channels and uncoupled
markers.
provides a transmission (same as S21) and reflection
(same as S11) enhanced response calibration (forward
direction). Enhanced response generates a 1-port cal for
reflection and an improved calibration over the response
cal for transmission (ET only).
TITLE TO P MTR/HPIB
Local
SET ADDRESSES
ADDRESS: P MTR/HPIB
TITLE TO PERIPHERAL
Seq
SPECIAL FUNCTIONS
PERIPHERAL HPIB ADDR
TITLE TO PRNTR/HPIB
Local
SET ADDRESSES
ADDRESS: PRINTER
TRACKING on OFF
TRAN/REFL ENH. RESP.