6-18
Error Messages
Error Messages in Alphabetical Order
PRINTER: not handshaking
Error Number
177
The printer at the parallel port is not responding.
PRINTER: not on line
Error Number
172
The printer at the parallel port is not set on line.
PRINTER: not on, not connected, wrong addrs
Error Number
24
The printer does not respond to control. Verify power to the printer, and check
the HP-IB connection between the analyzer and the printer. Ensure that the
printer address recognized by the analyzer matches the HP-IB address set on
the printer itself.
PRINTER: paper error
Error Number
171
There is a paper-related problem with the parallel port printer such as a paper
jam or out-of-paper condition.
PRINTER: power off
Error Number
174
The power to the printer at the parallel port is off.
PRINT/PLOT IN PROGRESS, ABORT WITH LOCAL
Error Number
166
If a print or plot is in progress and you attempt a second print or plot, this
message is displayed and the second attempt is ignored. To abort a print or plot
in progress, press .
PROCESSING DISPLAY LIST
Information
Message
The display information is being processed for a screen print to a copy device
and stored in the copy spool buffer. During this time, the analyzer's resources
are dedicated to this task (which takes less than a few seconds).
PWR MTR NOT ON/CONNECTED OR WRONG ADDRS
Error Number
117
The power meter cannot be accessed by the analyzer. Verify that the power
meter address and model number set in the analyzer match the address and
model number of the actual power meter.
RANGE CAUSED POWER LVL CHANGE IN LIST
Error Number
213
The selected power range changed the power level of one or more segments in
the swept list table. Change the segment power or change the power range.
Local
To Next Page
Loading...
