Chapter 4
Configure and Troubleshoot
This chapter covers: power-up following the hardware upgrade, and configuration of the
newly installed elements into the system using the firmware. Some troubleshooting is also
included.
Examples show sample console displays for a 4P system.
Two conventions are used:
1. Sections of console output that are not relevant to verifying this upgrade have been
deleted. They are represented in the example text as:
<< ------------ lines deleted ------------- >>
Relevant sections are highlighted. Your User Information CD has complete power-
up information.
2. Commands that you input are shown in boldface type, and underlined. For example:
show cable
Sections include:
• Notify server management of new member(s)
• Set membership takes effect
• Reset micros
• Run show cable
• Connect to partition
• Troubleshooting during console power-up
• Troubleshooting power during power-up
Configure and Troubleshoot 4-1
To Next Page
Loading...
Need help?
General