HP Apollo a6000 Chassis User Manual

Removal and replacement procedures 33
3.
Remove the I/O module.
To replace the component, reverse the removal procedure.
Management module
IMPORTANT: Always complete the installation of both power cages before installing the
management module.
To remove the component:
1. Power down all servers ("Power down the server" on page 20).
2. Remove the management module.
To replace the component, reverse the removal procedure.

HP Apollo a6000 Chassis Specifications

General

Form Factor	Rack
Number of Nodes Supported	4
Processor Support	Intel Xeon Scalable processors
Management	Integrated Lights-Out (iLO)
Memory Support	Varies by node. Supports DDR4 memory.
Drive Bays	Varies by node. Supports SAS/SATA/SSD drives.
Expansion Slots	Varies by node. Supports PCIe slots.
Networking	Varies by node. Supports Ethernet and InfiniBand.