HP Apollo a6000 Chassis User Manual

Specifications 56
Specifications
Chassis specifications
Specification Value
Height
22.02 cm (8.67 in)
Depth
86.23 cm (33.95 in)
Width
44.81 cm (17.64 in)
Weight, fully loaded
97.98 kg (216.00 lb)
Weight, empty
25.85 kg (57.00 lb)
Chassis environmental specifications
Specification Value
Temperature range*
—
Operating
10°C to 35°C (50°F to 95°F)
Non-operating
-30°C to 60°C (-22°F to
140°F)
Maximum Wet bulb temperature
—
Operating
28ºC (82.4ºF)
Non-operating
38.7ºC (101.7ºF)
Relative humidity
(non-condensing)**
—
Operating
10% to 90%
Non-operating
5% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F per 1000 ft) to 3048
m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048 m (10,000 ft) or 70 kPa/10.1 psia.
Upper non-operating limit is 9,144 m (30,000 ft).
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 kPa (10.1 psia).
Power shelf specifications
Specification
Value
Height
6.47 cm (2.55 in)
Depth
78.44 cm (30.88 in)
Width
44.81 cm (17.64 in)
Weight, fully loaded
27.22 kg (60.00 lb)
Weight, empty
9.07 kg (20.00 lb)

HP Apollo a6000 Chassis Specifications

General

Form Factor	Rack
Number of Nodes Supported	4
Processor Support	Intel Xeon Scalable processors
Management	Integrated Lights-Out (iLO)
Memory Support	Varies by node. Supports DDR4 memory.
Drive Bays	Varies by node. Supports SAS/SATA/SSD drives.
Expansion Slots	Varies by node. Supports PCIe slots.
Networking	Varies by node. Supports Ethernet and InfiniBand.