HP Apollo a6000 Chassis User Manual

Cabling 48
3. Connect the power management cable to the power shelf with the cable's plastic tab facing up.
CAUTION:
To prevent damage to the power management cable, release the cable by
pressing the latches when disconnecting, instead of pulling directly.
IMPORTANT: When connecting the power management cable to the chassis management
module and the power shelf, be sure to install the cable with the plastic tab on the top of the
connector. Failure to install the cable properly can result in performance and reporting issues.
The examples below represent possible configurations for cabling the system. The power cables are
shown in blue and the power management cables are shown in green.

HP Apollo a6000 Chassis Specifications

General

Form Factor	Rack
Number of Nodes Supported	4
Processor Support	Intel Xeon Scalable processors
Management	Integrated Lights-Out (iLO)
Memory Support	Varies by node. Supports DDR4 memory.
Drive Bays	Varies by node. Supports SAS/SATA/SSD drives.
Expansion Slots	Varies by node. Supports PCIe slots.
Networking	Varies by node. Supports Ethernet and InfiniBand.