Chapter 2 Introducing the Aruba 8325 Switch 17
3 Power Supply 1 (PS1) LED
4 Power Supply 2 (PS2) LED
5Fan LED
Table 9: Chassis LED behavior
Chassis LEDs Function State Meaning
PS1/PS2 Power supply status On green Power supply is installed and
operating with all power
supplies and fans installed and
no faults are present.
On amber Fault detected for installed
power supply, or power supply
is not receiving power.
Off Power supply is not installed.
Fan Fan tray status On green System fans are operating
normally.
On amber One or more system fans has a
fault, or the minimum number of
fans are not installed.
Global Status Internal power status of
the switch.
Self-test status
Switch/port fault status
On green The switch has passed self-test
and is powered up normally with
all power supplies and fans
installed and no faults are
present.
Flashing amber • The switch initialization is in
progress during bootup.
• A fault or initialization failure
has occurred on the switch,
one of the switch ports,
power supplies, or a fan.
The port LEDs with the fault
will flash simultaneously.
LEDs for power supplies
and fans with a fault will be
on amber.
• Port-speed mismatch. A
transceiver is installed in a
port configured for a
different speed.
Off The unit is not receiving power.
Table 8: Chassis LED labels for the Aruba 8325-32C (JL626A, JL627A, JL859A, and JL860A)
Label Description
To Next Page
Loading...
