Chapter 3 Installing the switch 29
Chapter 3
Installing the switch
This chapter shows how to install the switch. The Aruba 8325 switch requires you to order a rack mount kit that
includes the brackets for mounting the switch in a standard 19-inch telco rack, or in an equipment cabinet.
Included parts
• Documentation kit
• USB Bluetooth adapter enables you to configure your switch from your mobile device. Requires the Aruba CX
Mobile App. (Adapter is attached to a card in the documentation kit). For information about using the Aruba CX
mobile app to configure the switch, see the Fundamentals Guide for your switch and software release.
• For units with AC power supplies, power cord, one of the following. Part number or J-number (SKU) is
orderable through Aruba purchasing systems.
• For units with DC power supplies, DC power cable (5400-3519).
Parts not included
Rack mounting your Aruba 8325 switch is supported using these rack mount kits:
• JL482B, JL482C, Aruba X472 2-Post Rack Kit (Not included. Ordered separately.)
Argentina 8121-0729 J9891A Israel 8121-1004 J9899A
Australia/New Zealand 8121-0837 J9883A Japan 8121-1143 J9893A
Brazil 8121-1071 J9894A Switzerland 8121-0738 J9898A
Chile 8121-0735 J9886A South Africa 8121-0737 J9897A
China 8121-0943 J9890A Taiwan 8121-0964 J9887A
Continental Europe/South
Korea
8121-0731 J9885A Philippines/Thailand 8121-0734 J9895A
Denmark 8121-0733 J9888A
UK/Hong Kong/Singapore/
Malaysia
8121-0739 J9884A
India 8121-0564 J9892A US/Canada/Mexico 8121-1141 J9896A
NA Hi-Voltage (non-locking)
C13 to NEMA 6-20
8120-3396 J9936A
PDU NA/Japan/TW
PDU Rest of World
PDU India-only
8121-1091 J9943A
8121-1094 J9944A
P09371-001 JL671A
NA Hi-Voltage (locking) C15
to NEMA L6-20
8121-0941 J9955A*
* Ordered separate from the switch. To order a switch that will use a J9955A power cord, use the “no power
cord” option, #AC3, and specify the J9955A power cord as a separate line item in the order.
If you have not already done so, order an Aruba rack mount kit for use with your 8325 switch.