Chapter 2 Introducing the Aruba 8325 Switch 19
Figure 6: Port LEDs for the Aruba 8325-32C (JL626A, JL627A, JL859A, and JL860A)
Table 11: Port LED behavior for the Aruba 8325-48Y8C (JL624A, JL625A, JL857A, and JL858A)
Chassis LEDs Function State Meaning
SFP28 port LEDs To display link
information for the port.
On green Shows a valid link at 25/10 Gbps.
Flashing amber When the Global Status LED is
simultaneously flashing amber,
indicates a port-speed mismatch,
an incompatible, unsupported, or
faulty transceiver, or a port failure.
Off Port is disabled, not connected, or
not receiving a link beat signal.
QSFP28 port LEDs To display link and
activity information for
the port.
On green Shows a valid link at 100/40 Gbps.
Flashing amber When the Global Status LED is
simultaneously flashing amber with
the Lane 1 LED, indicates an
unsupported or faulty transceiver,
or a port failure.
Off Port is disabled, not connected, or
not receiving a link beat signal.
Management port Link
LED
To display link
information for the port.
On green Shows a valid link.
Off Port is disabled, not connected, or
not receiving a link beat signal.
Management port Act
LED
To display activity
information for the port.
Flashing yellow Flashing indicates port activity.
Table 12: Port LED labels for the Aruba 8325-32C (JL626A, JL627A, JL859A, and JL860A)
Label Description
1 QSFP28 port LED and lane 1 indicator
2 QSFP28 lane 2 LED
To Next Page
Loading...
