26 Aruba 8325 Switch Installation and Getting Started Guide
Figure 11: Aruba 8325 fan assemblies
The switch can tolerate the failure of a single fan assembly while maintaining a safe operating temperature. The
switch may continue to operate with one failed fan assembly. If the switch reaches an overtemp condition, the
switch will shut down. For best operation, the failed fan assembly should be replaced as soon as possible.
If one or more of the fan assemblies have failed, the front-panel Fan LED will be on amber and failed fan assembly
LEDs will be on red.
If multiple fans have failed, the switch should be immediately powered off and the fan assemblies replaced.
Table 20: Aruba 8325 fan assemblies
Fan assembly Color code 48-port switches 32-port switches
Aruba 8325-48Y8C Front-to-Back Fan (JL628A) Red Yes No
Aruba 8325-48Y8C Back-to-Front Fan (JL629A) Blue Yes No
Aruba 8325-32C Front-to-Back Fan (JL630A) Red No Yes
Aruba 8325-32C Back-to-Front Fan (JL631A) Blue No Yes
Table 21: Aruba 8325 fan assemblies
Label Description
1 Fan release latch
2 Aruba 8325-48Y8C Front-to-Back Fan (JL628A)
3 Fan release screw
4 Aruba 8325-32C Back-to-Front Fan (JL631A)
The Aruba 8325 switch is not compatible with fan assemblies from other Aruba hardware platforms.
To Next Page
Loading...
