Operator Intervention
Conditions (40xxx)
This list specifies the set of PJL error codes and
corresponding control panel display strings for conditions
where operator intervention is required. Printing cannot
continue until the condition is resolved.
Status Code Display String or Code Meaning
40000 SLEEP MODE (STANDBY) *
40005 Cartridge error during align cartridges (or
reading setup sheet—DesignJet)
40010 14 NO EP CART or INSTALL TONER
CARTRIDGE or no electrical contact with
one or more ink cartridges (DesignJet)
40011 Accessing ink cartridges (DesignJet)
40019 REMOVE PAPER FROM [bin name]
40020 NO MICR TONER or INSTALL MICR
TONER CARTRIDGE
40021 12 PRINTER OPEN OR NO EP CART or
CLOSE PRINTER COVER (or lower lever
or lower window—DesignJet)
40022 13 PAPER JAM or REMOVE PAPER JAM
40024 FE CARTRIDGE
40026 PC INSTALL or INSTALL TRAY 2
40038 16 LOW TONER or TONER LOW or
TONER LOW, PRESS GO KEY
40046 FI INSERT CART
40047 FR REMOVE CART
40048 [PJL OPMSG]
40049 [PJL STMSG]
40050 50 SERVICE or 50 FUSER ERROR, CYCLE
POWER
40051 51 ERROR or 51 PRINTER ERROR,
CYCLE POWER
40052 52 ERROR or 52 PRINTER ERROR,
CYCLE POWER
40053 53-xy-zz ERROR
* This is not an error. The printer is waiting for data.
D-16 PJL Status Codes
To Next Page
Loading...
