Example: Nested
JOB Commands
This example shows a PCL job that was sent to spooler 1,
which in turn was sent to spooler 2 (the nested jobs are
indented). Note that the first job name is overwritten by the
second job name (“Spooler 1 Job”) when the second JOB
command is processed.
<ESC>%-12345X@PJL <CR><LF>
@PJL JOB NAME = "Printing Job Sent From
~Spooler 2" <CR><LF>
<ESC>%-12345X@PJL <CR><LF>
@PJL COMMENT Printing a PCL job <CR><LF>
@PJL JOB NAME = "Spooler 1 Job" <CR><LF>
@PJL SET RESOLUTION = 600 <CR><LF>
<ESC>%-12345X@PJL <CR><LF>
@PJL ENTER LANGUAGE = PCL <CR><LF>
<ESC>E . . PCL print job . .<ESC>E
~<ESC>%-12345X
~<ESC>%-12345X@PJL <CR><LF>
@PJL EOJ NAME = "End Spooler 1 Job" <CR><LF>
<ESC>%-12345X
~<ESC>%-12345X@PJL <CR><LF>
@PJL EOJ NAME = "End Spooler 2 Job" <CR><LF>
<ESC>%-12345X
Related Commands: EOJ, USTATUS, DEFAULT
Job Separation Commands 5-7
To Next Page
Loading...
