Auto-Continuable
Conditions (30xxx)
This list specifies the set of PJL error codes and
corresponding control panel display strings for
auto-continuable conditions. If no action is taken, the device
automatically continues if auto-continue is set to true
(except for 30035 and 30036 errors).
Status Code Display String or Code Meaning
30010 * STATUS BUFFER OVERFLOW
30016 20 MEM OVERFLOW or 20 MEMORY
OVERFLOW DATA LOST or 20
INSUFFICIENT MEMORY, PRESS GO KEY
30017 21 PRINT OVERRUN or 21 PRINT
OVERRUN DATA LOST or 21 PAGE TOO
COMPLEX
30018 40 ERROR or 40.1 HP MIO 1 ERROR
or 40.2 HP MIO 2 ERROR or
40 SER IO ERROR
30027 22 I/O CONFIG ERROR or 22 SER IO ERROR
22 HP MIO 1 IO ERROR CHECK SETUP or
22 HP MIO 2 IO ERROR CHECK SETUP or
22 PARALLEL IO ERROR CHECK SETUP
30034 41.x ERROR or 41.3 PAPER ERROR
30035 68 ERROR CHECK CONFIGURATION or
68 NVRAM ERROR, SETTINGS NOT
SAVED or 68 ERROR
30036 68 SERVICE or 68 NVRAM FULL CHECK
CONFIGURATION or 68 NVRAM ERROR,
SETTINGS NOT SAVED
30072 49 REMOVE PAGE
30076 PERSONALITY MEMORY OVERFLOW/
OUT OF MEMORY
30094 41.1 GENERAL MISPRINT ERROR
* If creating applications for the HP LaserJet 4 and 5 printer families, see
“Printer Status Readback” in the “HP LaserJet 4 and 5 Printer Family
Comments” section in Appendix A.
PJL Status Codes D-11
To Next Page
Loading...
