HP LaserJet IIISi
Comments
The LaserJet IIISi printer implements the three PJL kernel
commands: ENTER, COMMENT, and the UEL command.
As with other PJL printers, the HP LaserJet IIISi printer
performs explicit printer language switching using the
ENTER command. To enable the printer for language
switching, the SYS SWITCH control panel setting must be
set to ON. To select a default printer language for implicit
switching, set SYS = to the desired language (PCL or
PostScript) from the control panel. The LaserJet IIISi
printer does not perform context switching.
The HP LaserJet IIISi printer does not support any PJL
status readback commands, environment variable
commands, or device attendance commands.
For an example that uses the PJL features found in the
HP LaserJet IIISi printer, see the “Using the ENTER
Command” example in Chapter 4.
A-28 Feature Support
To Next Page
Loading...
