HP Compaq dc5000 MT

7–6 360201-002 Service Reference Guide, dc5000
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
7.5 Front Drive Bezels
1. Prepare the computer for disassembly (Section 7.1, “Preparation for Disassembly”).
2. Remove the computer access panel (Section 7.3, “Computer Access Panel”).
3. Remove the front bezel (Section 7.4, “Front Bezel”).
4. Press the large retaining tab 1 on the left side of the bezel insert to the left and push the
cover out of the front bezel 2.
To install a bezel or a bezel blank, reverse the removal procedure.