HP Compaq dc7100 DT Technical Reference Guide

2-16 361834-002 Technical Reference Guide
System Overview
Small Form Factor / Slim Tower Chassis
The chassis layouts for the Small Form Factor (SFF) used for the HP Compaq dc7100 models
and the Slim Tower (ST) used for the HP Comapq dx6100 models are shown in Figure 2-13.
Features include:
■ Tilting drive cage assembly for easy access to processor and memory sockets
■ Two configurations:
❏ Without card cage:
◆ Two half-height, full length PCI 2.3 slots
◆ One PCI Express x16 graphics/SDVO slot
◆ One PCI Express x1 slot
❏ With card cage:
◆ Two full-height, full-length PCI 2.3 slots
NOTE:
[1] Accepts PCI-E graphics or reversed-layout ADD2 card.
Figure 2-13. SFF / ST Chassis Layout, Top / Right Side Views
Item Description Item Description
1 Power supply assembly 6 Card cage
2 DIMM sockets (4) 7 Processor socket
3 PCI Express x1 slot 8 Chassis fan
4 PCI Express x16 graphics/reverse-layout slot [1] 9 Diskette drive bay
5 PCI 2.3 slots (2) 10 CD-ROM drive bay
Chassis without card cage
Chassis with card cage
1
2
3
4
5
6
7
8
-
9
1
2
8
9
-
7

HP Compaq dc7100 DT Specifications

General

Processor Speed	Up to 3.8 GHz
Chipset	Intel 915G
Memory	Up to 4 GB DDR2 SDRAM
Operating System	Windows XP Professional
Form Factor	Desktop
Processor	Intel Pentium 4
Storage	40 GB to 160 GB SATA
Graphics	ATI Radeon X300 SE
Optical Drive	DVD-ROM
Audio	Integrated audio
Network	Integrated Gigabit Ethernet
Expansion Slots	1 PCI Express x16
Ports	1 Parallel, 1 Serial, 2 PS/2, 1 VGA