HP Compaq Elite 8300 All-in-One User Manual

Computer Setup—Security
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-3 Computer Setup—Security
Option Description
Setup Password Allows you to set and enable a setup (administrator) password.
NOTE: If the setup password is set, it is required to change Computer Setup options, flash the
ROM, and make changes to certain plug and play settings under Windows.
Power-On Password Allows you to set and enable a power-on password. The power-on password prompt appears
after a power cycle or reboot. If the user does not enter the correct power-on password, the unit
will not boot.
Device Security Allows you to set Device Available/Device Hidden for:
●
Embedded security device (some models)
●
System audio
● Network controller
●
SATA0
●
SATA1
●
SATA2
●
SATA3
USB Security Allows you to enable or disable groups of USB ports or individual USB ports. Default is device
available.
● Front USB Ports
◦
USB Port 1
◦
USB Port 2
● Rear USB Ports
◦ USB Port 1
◦
USB Port 2
◦
USB Port 3
◦ USB Port 4
●
Accessory USB Ports
◦
USB Port 1
◦ USB Port 2
◦
USB Port 3
◦
USB Port 4
◦
USB Port 5
◦
USB Port 6
Computer Setup (F10) utilities 15

HP Compaq Elite 8300 All-in-One Specifications

General

Brand	HP
Model	Compaq Elite 8300 All-in-One
Category	Desktop
Language	English