6–6 Maintenance and Service Guide
Removal and Replacement Procedures
6.4 Hard Drive
1. Prepare the notebook for disassembly (Section 6.3).
2. Remove the two PM2.0×5.0 screws 1 that secure the hard
drive cover to the notebook.
3. Lift the right side of the hard drive cover and swing it to the
left 2 to remove it.
✎
The hard drive cover is included in the Miscellaneous
Plastics/Hardware Kit, spare part number 383549-001.
Removing the Hard Drive Cover
Hard Drive Spare Part Number Information
Hard drives (all 5400 rpm; include cover, frame, and connector)
80-GB
80-GB
60-GB
40-GB
405839-001
383527-001
383526-001
383525-001
To Next Page
Loading...
