EasyManuals Logo

HP Compaq nc6220 Maintenance And Service Guide

HP Compaq nc6220
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Product Description
Maintenance and Service Guide 1–17
Table 1-6
Top Components, Part 1
Item Component Function
1 Power light On: The computer is on.
2 Power button When the computer is:
Off, press and release to turn on the
computer.
In standby, press and release to exit
standby.
In hibernation, press and release to
restore from hibernation.
If the system has stopped responding
and Windows shutdown procedures
cannot be used, press to the left and hold
for 5 seconds to turn off the computer.
3 Info Center button Enables you to view a list of commonly
used software solutions.
4 Display switch Initiates standby if the display is closed
while the computer is turned on.
5 Wireless button
Wireless light
Enables/disables the WLAN and
Bluetooth® devices.
On: An integrated wireless device is
hardware enabled.
6 Presentation mode
button
Turns on Presentation mode.
7 Caps lock light On: caps lock is on.
8 Num lock light On: num lock is on or the embedded
numeric keypad is enabled.
9 Volume mute button Turns off the computer sound.

Table of Contents

Other manuals for HP Compaq nc6220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq nc6220 and is the answer not in the manual?

HP Compaq nc6220 Specifications

General IconGeneral
Display14.1-inch TFT
Maximum Memory4 GB
Hard Drive InterfaceATA-100
GraphicsIntel Graphics Media Accelerator 900
Operating SystemWindows XP Professional
Battery LifeUp to 4 hours
ProcessorIntel Pentium M
Display Resolution1024 x 768
Storage40 GB
Networking10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical DriveDVD-ROM
RAM512 MB to 2 GB

Related product manuals