HP Compaq nc6220 Maintenance And Service Guide

Software Update and Recovery
Maintenance and Service Guide 3–13
4. Press the power button again to turn on the computer.
5. When prompted, press any key to start from the disc.
After a few minutes, you may need to select your language,
and then the Setup Wizard opens.
6. Press
enter to continue.
A licensing agreement page is displayed.
7. Press
f8 to accept the agreement and continue.
The “Setup” page is displayed.
8. Press
esc to continue installing a new copy of the operating
system instead of repairing it.
9. Press
enter to set up the operating system.
10. Press
C to continue setup using this partition.
11. Select Format the partition using the NTFS file system
(Quick), and then press
enter.
Ä
Formatting this drive deletes all current files.
12. Press F to format the drive.
The reinstallation process begins. This process takes
1 to 2 hours to complete.
The computer restarts in Windows when the process is complete.

HP Compaq nc6220 Specifications

General

Display	14.1-inch TFT
Maximum Memory	4 GB
Hard Drive Interface	ATA-100
Graphics	Intel Graphics Media Accelerator 900
Operating System	Windows XP Professional
Battery Life	Up to 4 hours
Processor	Intel Pentium M
Display Resolution	1024 x 768
Storage	40 GB
Networking	10/100/1000 Ethernet, 802.11b/g Wi-Fi
Ports	3 x USB 2.0, VGA, RJ-11, RJ-45, headphone/microphone jacks
Optical Drive	DVD-ROM
RAM	512 MB to 2 GB