To Next Page

To Previous Page

3. Adjust the monitor’s height to a comfortable position for your individual workstation. The monitor’s top

bezel edge should not exceed a height that is parallel to your eye height. A monitor that is positioned

low and reclined may be more comfortable for users with corrective lenses. The monitor should be

repositioned as you adjust your working posture throughout the work day.

NOTE: When the monitor is unfolded for the first time, the display head is locked from adjusting to a

full-height position. To adjust the display head to full height, press down on the display head to unlock

it then pull up on the display head to raise it to the full-height position.

4. You can pivot the monitor from landscape to portrait orientation viewing to adapt to your application.

a. Adjust the monitor to full height position and tilt the monitor back to full tilt position (1).

b. Pivot the monitor clockwise 90° from landscape to portrait orientation (2).

CAUTION: If the monitor is not in full height and full tilt position when pivoting, the bottom right

corner of the monitor panel will come in contact with the base and potentially cause damage to

the monitor.

If you are adding an optional speaker bar to the monitor, install it after pivoting the monitor. The

speaker bar will come in contact with the base when pivoting and potentially cause damage to the

monitor or speaker bar.

14 Chapter 3 Setting up the monitor

Questions and Answers:

Need help?

Do you have a question about the HP E201 and is the answer not in the manual?

HP E201 Specifications

General