Need help?Do you have a question about the HP E27 G5 and is the answer not in the manual?
General| Color gamut | 99 % |
|---|---|
| Pixel pitch | 0.31 x 0.31 mm |
| Screen shape | Flat |
| Display diagonal | 27 \ |
| Anti-glare screen | Yes |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Vertical scan range | 50 - 75 Hz |
| Maximum refresh rate | 75 Hz |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 16.7 million colors |
| Display brightness (peak) | 300 cd/m² |
| Supported graphics resolutions | 640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080) |
| HDMI version | 1.4 |
| DisplayPort version | 1.2 |
| USB upstream port type | USB Type-B |
| USB Type-A downstream ports quantity | 4 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 50 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 30 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Package depth | 160 mm |
| Package width | 699 mm |
| Package height | 446 mm |
| Package weight | 10880 g |
| Pivot angle | -90 - 90 ° |
| Tilt angle range | -5 - 20 ° |
| Height adjustment | 150 mm |
| Panel mounting interface | 100 x 100 mm |
| Product color | Black |
| Country of origin | China |
| Market positioning | Business |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth (with stand) | 227 mm |
|---|---|
| Width (with stand) | 612 mm |
| Height (with stand) | 546 mm |
| Weight (with stand) | 6960 g |
| Depth (without stand) | 4.5 mm |
| Width (without stand) | 611.7 mm |
| Height (without stand) | 363.3 mm |
| Weight (without stand) | 4830 g |
Provides crucial safety precautions for servicing the monitor to prevent injury.
Step-by-step instructions for removing the monitor's rear cover.
Step-by-step guide to desoldering and soldering the DP connector (CN502) on the main board.
Step-by-step guide to desoldering and soldering the HDMI connector (CN501) on the main board.
Step-by-step guide to desoldering and soldering the USB UP connector (CN105) on the main board.
To Next Page
