Appendix E Server Management Using HP Support Anywhere
113
The following diagram shows how the Remote Console feature is setup.
Figure E-11. Graphics Console Redirection (Windows NT)
A window on the console display exactly mimics the display at the NetServer. In
this way, you can take full control of your HP NetServer from the remote console.
However, to enable graphics redirection, pcANYWHERE32 software must be
installed on both the NetServer and the remote console.
NOTE pcANYWHERE32 graphics console redirection requires your
HP NetServer to be running Windows NT. In addition,
remember that pcANYWHERE32 operates only on consoles
running either Windows 95 or Windows NT.
pcANYWHERE32 allows you to redirect what’s graphically displayed on an HP
NetServer running Windows NT 3.51 or 4.0 to a remote Windows NT 3.51 or
Windows 95 PC console.
Installation of pcANYWHERE32 is a two-part process. Separate setup steps are
required for installation at the NetServer and at the workstation designated as the
remote console. This User Guide details only procedures for setup at the
NetServer. For complete instructions on setup and use see the HP Support
Anywhere Installation and User Guide.
To Next Page
Loading...
Need help?
General