Appendix B
53
Declaration of Conformity
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Hewlett-Packard Company
Manufacturer’s Address: 5301 Stevens Creek Blvd.
Santa Clara, CA 95052
USA
declares, that the product
Product Name: Network Server
Model Number(s): HP NetServer E 30 5/133, 5/166, CTO Mod 0
HP NetServer E 40 6/180, 6/200, CTO Mod 0, BTO
Product Options: All
conforms to the following Product Specifications:
Safety: IEC 950: 1991 + A1, A2 / EN 60950: 1992 + A1, A2
EMC: CISPR 22: 1993 / EN 55022; 1994 - Class B
1, 2
EN 50082-1: 1992 - Generic Immunity
IEC 801-2: 1991, 4 kV CD, 8 kV AD
IEC 801-3: 1984, 3V/m
IEC 801-4: 1988, 0.5 kV Signal Lines, 1 kV Power Lines
1) The Product was tested in a typical configuration with Hewlett-Packard peripherals.
2) Models configured with a network interface board and shielded twisted-pair data cable.
Supplementary Information:
The product herewith complies with the requirements of the following directives and carries the CE marking
accordingly:
- EMC Directive 89/336/EEC
- Low Voltage Directive 73/23/EEC
Santa Clara, November 5, 1996
Nigel Marrion / Quality Manager
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH,
Department ZQ / Standards Europe, Herrenberger Straße 130, D-7030 Böblingen (FAX: + 49-7031-143143)
To Next Page
Loading...
