HP4402.book : chapter3.fm 14 Thu Feb 11 15:53:59 1999
Menu Reference
Front Panel Menu Reference "Frequency/Cal Fac" Menu
3-14 HP E4418B User’s Guide
•
Press this softkey to enter the measurement calibration factor for
channel A in the range of 1% to 150%. The default value is 100%.
Use the , , and hardkeys to change the
calibration factor. To confirm your choice press . Entering a
calibration factor using this softkey is only possible when you are
using an HP 8480 series power sensor.
Cal Fac
%
To Next Page
Loading...
