HP EliteBook 8440P - Replacing a hard drive

5–6 Maintenance and Service Guide
Computer Setup
Select To do this
System Configuration menu (continued)
Device Configurations (continued) ■ Enable/disable TXT (Intel Trusted Execution Technology)
(select models only; disabled by default).
■ Enable/disable Multi Core CPU (enabled by default).
■ Enable/disable Intel HT Technology (enabled by default).
■ Enable/disable Wake on USB (enabled by default).
■ Enable/disable Num lock state at boot (disabled by
default).
Built-In Device Options ■ Enable/disable the wireless button state (enabled by
default).
■ Enable/disable embedded WLAN device radio (select
models only; enabled by default).
■ Enable/disable the embedded Bluetooth® device radio
(enabled by default).
■ Enable/disable the Network Interface Controller (LAN)
(enabled by default).
■ Enable/disable LAN/WLAN switching (disabled by default).
■ Set the wake on LAN state. Options include the following:
❐ Disabled
❐ Boot to Network
❐ Follow Boot Order
■ Enable/disable the Ambient Light Sensor.
■ Enable/disable the Notebook Upgrade Bay device (enabled
by default).
■ Enable/disable the fingerprint device (enabled by default).
■ Enable/disable the integrated camera (enabled by default).
■ Enable/disable the Power Monitor Circuit (enabled by
default).
■ Enable/disable the audio device (enabled by default).
■ Enable/disable a modem device (enabled by default).
■ Enable/disable the microphone (enabled by default).
■ Enable/disable the internal speakers (enabled by default).
Port Options (all are enabled by default)
✎
All port options are enabled by default.
■ Enable/disable the serial port.
■ Enable/disable the parallel port.
■ Enable/disable the flash media reader.
■ Enable/disable the USB port.
Ä
Disabling the USB port also disables MultiBay
devices and ExpressCard devices on the advanced
port replicator.
■ Enable/disable the 1394 port.
■ Enable/disable the ExpressCard slot.
■ Enable/disable the Smart Card slot.
■ Enable/disable the eSATA port
(Continued)