Customizing Remote HP PC Hardware Diagnostics (UEFI) settings
1. Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup.
2. Select Advanced, and then select Settings.
3. Make your customization selections.
4. Select Main, and then Save Changes and Exit to save your settings.
Your changes take eect when the computer restarts.
To access documentation on using Remote HP PC Hardware Diagnostics (UEFI) to congure a server for remote
diagnostics or to customize which diagnostic tests are run, go to
http://www.hp.com/support. Select Find your
product, and then follow the on-screen instructions.
Using Remote HP PC Hardware Diagnostics (UEFI) settings (select products only) 57
To Next Page
Loading...
