Replacing the computer access panel
1. Align the edges of the access panel with the computer. Press in the tabs around all sides of the panel until it
is in place.
2. Reinstall the stand.
See Attaching and removing a stand on page 7.
3. Reconnect all cables to the computer.
See Connecting cables on page 11.
4. Reinstall the rear port cover.
See Installing the rear port cover on page 13.
5. Relock any security devices that were disengaged when the access panel was removed.
6. Place the computer in the upright position.
7. Plug the power cord into a AC outlet.
Removing and replacing the computer access panel 25
To Next Page
Loading...
